|
Items |
Description |
|
|
Output Control: Direction + pulse |
Drive current |
Isolated open circuit output: 5V, 20mA |
|
Driving method: |
Pulse + direction output |
|
|
Output frequency |
2000KHZ |
|
|
Supported axes |
MK3-IV: Support 3 axes MK4-IV: support 4 axes MK6-IV: Supports 6 axes |
|
|
Spindle speed output: Support 3 modes of output |
Analog speed regulation voltage output |
0-10V |
|
PWM output |
5V, 1KHZ, duty cycle: 0 to 100% |
|
|
Pulse + direction output |
Minimum output frequency: 15HZ Maximum output frequency: 4KHZ |
|
|
8 output ports |
drive current |
isolated open circuit output; maximum current: 50mA; Maximum driving voltage: 25V, Active low |
|
16 input ports |
Input current |
Isolated input: 5mA, Max. voltage: 25V |
|
Control signal |
Common anode signal |
|
|
Control signal type |
Position control |
|
|
Tool setting type |
Fixed tool setting, floating tool setting |
|
|
Support tool path file format |
*.nc; *.tap; *.txt |
|
|
Supported Drive Type |
Stepper / Servo Drive |
|
|
USB interface |
Compliant with USB2.0, Support full-speed transfer mode |
|
Features
- USB does not need to install drivers, all Windous versions are plug and play.
- Fully support USB hot swap, and monitor USB connection status at any time.
- Supports up to 6-axis linkage, including jog 6-axis linkage. (Depending on the model, the number of supported axes is different).
- It has 2000KHZ pulse output and supports servo / stepper motor.
- With status indicator, it can indicate USB connection status and Mach3 connection status.
- All IO ports are fully isolated, strong anti-interference and stable performance.
- Supports spindle PWM speed output: supports spindle pulse + direction output.
8.Aluminum shell, shielding interference, stable and reliable